tungsten carbide brazed tips

1.carbide brazed tips 2.100% raw material 3.trial order accept 4.finished and blanks available 5.professional suggestion

  Tungsten carbide brazed tips

 

 

Choosing method of selecting carbide insert grade

It is an important technology of using cemented carbide welding blades to choose a suitable grade. Grade is the material of cemented carbide chips. It is direct matteringt the machining cost and cuttingefficiency.

Different material need different grade. For example, ordinary carbon steel and alloy steel are need different grade. So in order to pick up the most suitable grade, we should know well about the performance and application of each grade. Here for your reference, we list the qualification and usage of each grade as below:

 

 

 

Grade	ISO Code	Densityg/cm3	HardnessHRA	T.R.SMPa	Applications recommended
YG3	K05	15.10	92.0	1400	Suitable for finishing of cast iron and nonferrous metal.
YG6X	K10	14.95	91.5	1800	The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel.
YG6	K15	14.95	90.5	1900	Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG8	K20	14.80	89.5	2200
YW1	M10	13.10	91.6	1600	Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel.
YW2	M20	13.00	90.6	1800	The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs.
YT15	P10	11.4	91.5	1600	Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed.
YT14	P20	11.6	90.8	1700	Suitable for the finishing and semi-finishing of steel and cast steel.
YT5	P30	12.9	90.5	2200	Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions.

 

 

  

   

Features of common turnery products

 

1.Higher smooth finish

with special fabrication processing, the blade surface have great capability of chip breaking.

 

2.Excellent precision can be offered to the workpiece

High precision of tool nose arc,reasonable groove profile design.

 

3.Cutting speed was improved 30%-50%

Efficacy speed up.

Adopting multilayer coatings technique.

 

4.Service life was increased 40%-50%

Using cemented carbide substrate with high strength,fine particle.

tungsten carbide brazed tips